Filter
Top Products
Rinse aid
For best results the rinse
aid dosage can be adjusted. The
dosage can be set between 0-6 ml.
The factory setting is 3 ml of rinse aid.
If the dishes are spotty:
–
Use a higher rinse aid setting.
If the dishes are cloudy or streaky:
–
Use a lower rinse aid setting.
^
Select the desired amount of rinse
aid and press the centre button to
confirm.
Buzzer
When the buzzer is activated, an
audible tone sounds at the end of a
program and when there is a fault.
Buzzer at the end of a program
You will hear the buzzer at the end of a
program. It will sound four times in
intervals with a noticeable pause in
between. Switching the dishwasher off
will switch the buzzer off.
Buzzer when there is a fault
In the event of a fault, the buzzer will
sound four times in intervals with only a
very short pause in between.
The buzzer which sounds when there
is fault cannot be deactivated.
Setting the buzzer volume
There are seven different volume
settings. If no volume is selected, the
buzzer is deactivated.
^
Select the desired volume and press
the centre button to confirm.
Settings menu
77