Filter
Top Products
Before using the commercial
dishwasher for the first time
you will need:
–
approx. 1 kg reactivation salt,
–
approx. 110 ml rinse aid,
–
for detergent see "Operating the
commercial dishwasher". For
available process chemicals from
Miele contact Miele Professional.
Every commercial dishwasher is
tested before leaving the factory.
There may be residual water in the
machine from this testing. This is not
an indication that it has been
previously used.
Filling the salt reservoir
To achieve good cleaning results, the
commercial dishwasher needs soft
water (water that is low in minerals).
Hard water results in white deposits on
dishware and in the dishwasher.
Therefore, tap water with a hardness of
4 gr/gal (70 ppm CaCO3) or more must
be softened. This takes place
automatically in the integrated water
softener. The water softener requires
reactivation salt. The water softener is
suitable for a water hardness of up to
36 gr/gal (650 ppm CaCO3).
See "Settings menu - Water hardness"
for setting the water softener.
If the hardness of your water is
always below 4 gr/gal (= 70 ppm
CaCO3), you do not need any salt.
However, you must still program
your dishwater for your water
hardness.
,
Do not fill the salt reservoir with
dishwashing detergent (even liquid
detergent). Dishwashing detergent
will damage the water softener.
,
Use only special, coarse-grained
reactivation salt. Other types of salt
may contain insoluble components
which can damage the water
softener.
Before using for the first time
21