Filter
Top Products
The PG 8083 SCVi comes equipped
with a 10/4 AWG cord and a
120V/208-240 V, 60 Hz NEMA 14-30P
plug.
If available, the dishwasher may be
connected to a AC 120 V, 60Hz power
supply.
Converting the machine to a different
type of power supply can lead to longer
program runtimes resulting in increased
energy consumption.
120V 208-240V
Rated Load (kW) 1.5 3.9-4.2
Fuse Rating 15A 30A
To connect the machine to a 120 V
supply, the standard power cord must
be removed and replaced by a 14/3
AWG cable of the type: S, SE, SO,
SOO, ST, STO or STOO. A 2 pole,
3-wire grounding plug and receptacle
are recommended (NEMA Type 5-15P).
The conversion diagram and wiring
diagram are secured to the inner side
of the toe kick.
Removing the toe kick
Disconnect the machine from the
mains electrical supply.
^
Remove the fixing screws from the
toe kick and take it off.
Power connection options
Electrical connection
69