Filter
Top Products
General problems with the commercial dishwasher
Problem Possible fault Solution
The indicators and
display are dark. Only
the - indicator
flashes slowly.
The indicators and the
display turn off
automatically to save
energy (Standby mode).
Press the -
button to come out of Standby
mode.
The interior lighting
does not come on
when the door is
opened.
The lighting has been
switched off
permanently.
Switch the lighting back on
again (see "Additional
functions, BrilliantLight").
The following fault
message is
displayed:
F Salt container lid
The buzzer sounds
during the program
and the In-operation
indicator light
flashes.
The salt reservoir cover
is not properly closed.
–
Close the salt reservoir
cover.
If the salt reservoir cover
opened during a program:
– Switch the dishwasher off
and then on again with the
- button.
– Re-start the program.
The buzzer sounds
during a program.
The following fault
message appears in
the display:
: Spray arm blocked
The middle spray arm is
blocked by dishware.
Open the commercial
dishwasher door and
rearrange items blocking the
spray arms.
The spray arm jets of the
middle arm are clogged.
–
Turn the commercial
dishwasher off with the -
button.
Then:
–
Clean the spray arm (see
"Cleaning and care").
Problem solving guide
55