Filter
Top Products
Basic settings
^
Press the - button to turn the
commercial dishwasher on.
If the commercial dishwasher is being
turned on for the first time, the welcome
screen will appear.
Language
The display automatically switches to
the language setting.
For details about the display, see
chapter Display.
^ Select the desired language and
confirm with the centre button.
The selected language is marked with a
(.
Water hardness
The display changes to the water
hardness setting.
–
The commercial dishwasher must be
correctly programmed to match the
hardness of your water.
–
Your local waterworks will be able to
advise you of the water hardness in
your area.
–
Where the water hardness fluctuates
(e.g. 17 - 25 gr/gal), always use the
higher value (in this example
25 gr/gal).
It is useful to know your water hardness
so that you can provide the service
technician with this information in the
event of any service calls.
Please note your water hardness below:
gr/gal
The water hardness factory setting is
programmed at 15 gr/gal (270 ppm
CaCO3).
^
Select the hardness of your water
supply and confirm with the centre
button.
See "Settings menu - Water
hardness" for more information.
If the display now shows
( Add rinse
aid
and F Add salt, press any button to
confirm. The display changes to the
main menu.
These basic settings are saved after
the first full program cycle is
completed.
The Welcome screen is no longer
displayed after the first full program
cycle is completed.
Before using for the first time
20