Filter
Top Products
UC360 Configuration
57
Network Settings
If installing the UC360 with a 3300/MCD, it may be easier to use static VLAN and QoS values
by manually entering the information into the UC360 Network Settings menu rather than
obtaining parameters via DHCP or other methods.
However, if you choose to have a DHCP server provide these values to the UC360, it should
be noted that the 3300/MCD DHCP server may not support a field for defining L2 and L3 QoS
values for Multimedia Conferencing. In this case, the L2 and L3 QoS values for Multimedia
Conferencing will need to be statically programmed.
See the UC360 Engineering Guidelines for details on the various network settings.
Note: The UC360 does not support the Windows 2000 server.
1. Press Settings
2. Press Advanced
3. Press System Settings
4. Press Network Settings
The following options are available as listed below.
View Current
All the items below are initially retrieved from the DHCP, except the MAC address. Some of
these options may be overridden by the Static settings.
Modify Static
Modify these values based on your network requirements.
802.x Protocol
802.1X Settings can be set as required or left blank.
Hardware
No changes required.
Tools and Features
No changes required.