Filter
Top Products
UC360 Administration and User Guide
72
Debug Settings
1. Press Settings
2. Press Advanced
3. Press System Settings
4. Press Debug Settings
5. Select Turn on/off debugging
A screen is displayed with several options. You have the option of turning on/off debug logs,
selecting options on the level of logging, and copying logs to an SD card.
By default, debug logging is enabled. Warning is the default Logging Level and Kernel Messages
are also enabled.
Reboot
This option allows you to perform a soft reboot, that is, reset the unit while preserving logging
and maintaining power to the UC360.
1. Press Settings
2. Press Advanced
3. Press System Settings
4. Select Reboot
5. Select Yes