Filter
Top Products
UC360 Administration and User Guide
78
SIP Service Selection
1. Select the Service Details tab under User and Device Configuration.
2. For the SIP Device Capabilities input an unused number from 1 to 60. (Default is 71)
Caution: SIP Device Capabilities numbers greater than 60 are set by the system
and cannot be changed by a user. SIP Device Capabilities 71 contains programming
not suitable for the UC360. This is why an administrator must select an unused SIP
Device Capabilities number from 1 to 60 and then program the appropriate settings
for that SIP Device Entry number to accommodate the UC360.