Southbend CO301HT Range User Manual


 
w
FIGURE 4
ITEM 1 PARTNUMBER 1 DESCRIPTION
A 1146201
B 1146500
114 x 20 x 3/4 Hex Head
II4 Lock Washer
C 1172650
D 1174259
Leg Pad (3/4 x 10 hole)
S.S. Leg (3/4 stud)
*
1174260 Leg Package (set of 4)
*
1174262
Earth Quake Legs SS (set of 4)
* 1174260 Leg package consists of four legs. Screws, leg pad, and lock washers are not included in leg package.
* Not shown - these are optional. The leg pad hardware will stay the same.
A WARNING
To avoid accidental aas disconnection and potential explosion:
l
For an appliance equipped with casters, the installation should be made with a connector that
complies with the standard for connectors for movable gas appliances, ANSI 221.69 or connec-
tors for movable gas appliances, CAN/CGA-6.1 6, and a quick-disconnect device that complies
with the standard for quick-disconnect devices for use with gas fuel, ANSI 221.41, or quick-
disconnect devices for use with gas fuel, CAN1 -6.9.
l
Adequate means must be provided to limit the movement of the appliance without depending on
the connector and the quick-disconnect device or its associated piping to limit the appliance
movement where the restraining means may be attached to the appliance.
A WARNING
To avoid accidental aas disconnection and potential explosion:
If disconnection of this restraint is necessary to move the appliance for cleaning, etc., reconnect
it when the appliance is moved to its originally installed position.
PAGE 10