Southbend CO301HT Range User Manual


 
CONTROL PANEL:
The textured control panel should be cleaned with warm water and mild soap. Never use cleaning solvents with a hydro-
carbon base.
MOTOR:
Lubrication information can be found on a permanent label located on motor.
A CAUTION
DO NOT USE ordinary steel wool as any particles left on the surface will rust.
NEVER USE a wire brush, steel or abrasive scouring pad (except stainless), scraper, file or other steel
tools. Surfaces which are marred collect dirt more rapidly and become more difficult to clean. Marring
also increases the possibility of corrosive attack.
DO NOT clean door gasket with a high chlorine solution or bleach.
NEVER use any corrosive cleaner. Use only cleaners approved for stainless steel.
A WARNING
Improper cleaning can result in expensive repairs or electrical shock. Do not get water on electrical
controls or motors.
PAGE 21