Filter
Top Products
ADJUSTMENTS
NOTICE
Service work should be performed only by a qualified technician who is experienced in, and
knowledgeable of, the operation of commercial gas, electric, and steam cooking equipment.
Contact the Authorized Southbend Service Agency for reliable service, dependable advice
or other assistance, and for genuine factory parts.
Warranty will be void and the manufacturer is relieved of all liability if:
(A) Service work is performed by other than a qualified technician.
(B) Other than genuine Southbeniyeplacement parts are installed.
i
/
FIGURE 7
Refer to figure 7 (above).
PILOT ADJUSTMENTS:
A. Remove the pilot adjust cover screw located at the pilot gas outlet on safety valve.
B. Using a screwdriver, turn pilot adjusting screw to the right to decrease or left to increase the size of the pilot
flame. (Flame should cover thermocouple tip, approximately i/2.“)
C. Replace pilot adjustment cover screw.
PAGE 16