Southbend CO301HT Range User Manual


 
Congratulations! You have purchased one of the finest pieces of heavy-duty commercial cooking equipment on the market.
You will find that your new equipment, like all Southbend equipment, has been designed and manufactured to meet the tough-
est standards in the industry. Each piece of Southbend equipment is carefully engineered and designs are verified through
laboratory tests and field installations. With proper care and field maintenance, you will experience years of reliable, trouble-
free operation. For best results, read this manual carefully.
RETAIN
THIS MANUAL FOR FUTURE REFERENCE.
TABLE OF CONTENTS:
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .................. 2
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...................... 3 - 4
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 12
Operation ..,............................................................................................................................................. 13 - 14
Cooking Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .......................... 15
Adjustments/Troubleshooting . . . 16 - 18
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .................... 19 - 21
Parts/Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........... 22 - 24
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ................................. 25
Location of Serial and Identification Plates: The serial plate with all specifications is located below the oven door, behind
the kick panel, attached to the frame base of the oven. Reference figure 1 item “B”. There is also a product identification
plate that has only the model and serial number attached to the front left corner of the valve panel.
Read these instructions carefully before attempting installation. “Installation” and Start Up” should be performed by a quali-
fied installer. Unless the installation instructions for the above-described Southbend product are followed and performed by a
qualified service technician (a person experienced in and knowledgeable with the installation of commercial gas and/or elec-
tric cooking equipment) then the terms and conditions of the Manufacturer’s Limited Warranty will be rendered void and no
warranty of any kind shall apply.
In the event you have questions concerning the installation, use, care, or service of the product, write to the Technical Service
Department, Southbend, 1100 Old Honeycutt Road, Fuquay-Varina, North Carolina 27526.
NOTICE
This product is intended for commercial use only; not for household use.
IMMEDIATELY INSPECT FOR SHIPPING DAMAGE
All containers should be examined for damage before and during unloading. The freight carrier has assumed
responsibility for its safe transit and delivery. If damaged equipment is received, either apparent or con-
cealed, a claim must be made with the delivering carrier.
A) Apparent damage or loss must be noted on the freight bill at the time of delivery. The freight bill must then
be signed by the carrier representative (Driver). If the bill is not signed, the carrier may refuse the claim.
The carrier can supply the necessary forms.
B) A request for inspection must be made to the carrier within 15 days if there is concealed damage or loss
that is not apparent until after the equipment is uncrated. The carrier should arrange an inspection. Be
certain to hold all contents plus all packing material.
m southbend
A MIDDLEBY COMPANY
1100 Old Honeycutt Road
Fuauav-Varina. NC 27526
(916) 65,9161
FAX (919) 552-9798
(800) 348-2558
PAGE 1