Filter
Top Products
8 – Copying discs—Program copy
46 TASCAM CD-RW402 Owner’s Manual
If a recordable disc with not enough space to hold the
contents of the source disc is used, the display shows
Not
enough
.
If drive 1 is in shuffle mode, the display shows PLAY
MODE!. If drive 1 is in programmed playback mode, the
program copy is available, not the disc copy (see “Pro-
gram copy” on page 46).
Program copy
Program copy is only possible with audio material.
If drive 1 is in programmed playback mode, disc
copying is not possible. Only programmed copying is
possible. This function is useful if you want to make
a copy of a disc, missing out some tracks, or rear-
ranging the order of the original tracks.
1 If a programmed playback order has not
been set for the source disc, make a pro-
grammed playback order (“Programmed
order playback” on page 24).
2 Insert a recordable disc on drive 2.
3 With both drives stopped, press the
DISC
COPY
key.
The drive 1 display shows
PGM COPY and the
drive 2 display shows
COPY> PGM.
4 Set the speed and finalize options as
described above (“Disc copying” on page 45).
The DAO option is also available here (“DAO
copying” on page 46).
5 While copying, the display shows the track
number and program step on drive 1:
4
TR
COPY 02p, with the track number and
“countup timer” shown on drive 2.
6 At the end of the program copy, drive 1
shows
Wait... and disc 2 display is blank, while
the disc is being finalized (if this has been
selected).
DAO copying
NOTE
Disc At Once copying must be carried out with a blank
disc in drive 2.
DAO copying is the only option available for CD-ROMs
and the whole of CD-EXTRA discs (music tracks of CD-
EXTRA discs may be copied using the copy operations
described above).
In the case of copying an audio disc, when the
FINALIZE> option is shown (see step 5 above), as well
as the
YES and NO options, a DAO option is also shown.
Select this option to perform DAO copying.
When a copy is made using the DAO copy option, the
drive 2 display shows
Lead In as a flashing display
(and a timed countdown) while the lead-in data is
being written.
During the copy process, drive 1 display shows
Now Copy 1->2.
The data (or audio data) is then copied as described
above).
When all the data has been copied, the drive 2 dis-
play shows
Lead Out as a flashing display (and a timed
countdown) while the lead-out data is being written.
In the case of a CD-ROM disc being copied in this
way, an option to perform compare operation is given
after the copy speed selection. Drive 2 shows
COMPARE ?.
If the compare option has been selected for a CD-
ROM, the comparison is carried out after the lead-out
has been written (
COMPARE 1:2 on drive 1 and COMPARE
with a countdown time on drive 2.) This may take
some time to complete, depending on the disc being
copied.
An appropriate error message (
COMPARE ERR!) is
shown if there has been an error in copying.
At the end of the copy/compare operation, the dis-
plays briefly show
Wait... and then return to their nor-
mal mode.
NOTE
Do not turn off the power or otherwise interrupt a DAO
operation, or the destination disc will be unreadable (in
the case of a CD-R disc, it will become totally useless,
and in the case of a CD-RW it will have to be refreshed).