Filter
Top Products
8 – Copying discs—A-B Excluded copy
48 TASCAM CD-RW402 Owner’s Manual
The drive 2 display shows ExclRHSL>. This
allows a preview of the material immediately
before point A, immediately followed by the
material following point B (in other words, a
preview of the “join”).
6 To rehearse the copy, turn the MULTI DIAL
(2) to select YES, and press the MULTI DIAL.
The joined section is repeated. Display 2
shows
RehearsalOK?. If the join is satisfactory,
press the
MULTI DIAL, otherwise press STOP
and reset the A and B points.
If you do not want to rehearse, choose
NO,
and press the
MULTI DIAL.
7 Select the copy speed (x4, x2 or x1), and press
the
MULTI DIAL (2).
Drive 2 display shows
COPY START ?.
8 Press the
MULTI DIAL (2). Copying takes
place (standby and copy) as for other copy
operations.
The displays return to normal when the copy
operation is complete.
NOTE
The error messages mentioned above appear if the
wrong type of disc has been loaded as source or desti-
nation.
If the A and B points are too close together the display
shows
Not enough
.