Filter
Top Products
TASCAM CD-RW402 Owner’s Manual 7
1 – Introduction
The CD-RW402 is a sophisticated twin-deck CD
recording and duplication system. It features state-of-
the-art rewritable compact disc technology to allow
recording and playback of audio material on compact
disc media.
Operating is by means of the front panel, featuring an
easy-to-use menu system, and the included wired
remote control unit.
24-bit digital-to-analog and analog-to-digital con-
verters provide excellent recording and playback
quality for the CD recorder.
A sampling frequency convertor is incorporated,
allowing the recording of CDs from digital audio
sources which are at frequencies other than the CD
standard sampling frequency of 44.1 kHz.
Balanced and unbalanced analog connectors are fit-
ted for input and output at both the professional
+4 dBu, and –10 dBV levels
Disc track divisions can be entered manually, or can
produced automatically as a response to the input
signal level.
Jog function with preview allows precise setting of
cue points
Cue function allows instant return to the previous
start point
Pitch control allows time stretching and compression
Full index capability for recording
TOC editing allows the production of “virtual discs”
for copying
A recording buffer ensures that even the first milli-
seconds of a disc track are recorded.
“One-touch” fade-ins and fade-outs over a specified
time allow you to edit program material to your spe-
cific requirements.
A multi-function “multi dial” is used to set and con-
firm parameter settings.
NOTE
This product is designed to help you record and repro-
duce sound works to which you own the copyright, or
where you have obtained permission from the copy-
right holder or the rightful licensor. Unless you own the
copyright, or have obtained the appropriate permission
from the copyright holder or the rightful licensor, your
unauthorized recording, reproduction or distribution
thereof may result in severe criminal penalties under
copyright laws and international copyright treaties. If
you are uncertain about your rights, contact your legal
advisor. Under no circumstances will TEAC Corporation
be responsible for the consequences of any illegal copy-
ing performed using the CD-RW402.
Supplied accessories
As well as this manual, you should receive with your
CD-RW402:
• The RC-RW402 remote control unit
• An AC power cord for your area
• A rack mounting kit (four screws and washers)
• A quick-start guide
The RC-402 remote control unit is a wired remote
control unit and draws its power from the main unit.
There is therefore no need to insert batteries into the
remote control unit.
NOTE
If plug on the power cord supplied with your unit does
not match your local power fittings, double-check the
voltage rating on the back of the unit with your local
supply. If it does not match, or you are in any doubt,
contact your TASCAM representative, or a qualified
electrician, as appropriate. If the voltages match,
replace the cord with one appropriate for your area.
Some notes and precautions
Treat the CD-RW402 as you would any other piece
of precision equipment.
Avoid exposing it to extremes of temperature and
humidity and avoid mechanical shocks and vibration.
Keep the unit away from strong magnetic fields (TV
sets, computer monitors, large electric motors, etc.).