Teka MWL 20 BIT Microwave Oven User Manual


 
27
EN
Safety tips
Warning! In order to avoid any type of
flame, only use the microwave when you
are there to supervise. Very high power
levels or very long cooking times may heat
the food to excess and cause fires.
If you see smoke or fire, keep the door
closed, to put out the flames. Switch off the
appliance and remove the plug from the
socket.
Warning! Children may only use the
appliance under supervision, or if they
have been given instructions, so that they
may use the appliance safely and identify
the dangers in case of incorrect use.
Warning! Considerable care is required
when the grill is functioning. Keep children
away from the appliance!
Our appliances meet the necessary
regulations and rules for technical
equipment. However, these do not cover
all the possible accident risks.
When using inflammable materials, such
as plastics or paper containers, to heat or
cook foods, the cooking process must be
monitored on a continuous basis, because
of the risk of fire.
Before using dishes or containers in the
microwave, check if they are microwave-
save- Only use microwave-safe dishes.
The power cable should not touch damp,
sharp-edged objects or the appliance when
it is hot.
When connecting electrical appliances in
the vicinity of the microwave, ensure that
the power cables do not touch the
microwave when it is hot and that they do
not get caught in the oven door, in order to
avoid damage and danger.
Pay attention to operating faults. The
appliance may not be used in the following
cases:
- If the door does not close properly;
- If the door-hinges are damaged;
- If the contact surfaces between the door
and the front are damaged;
- If the glass in the window is damaged;
- If there is often an electrical arch inside the
oven, without the presence of any metallic
object.
The ventilation holes may not be covered.
Cleaning / maintenance:
Before carrying out any maintenance or
cleaning, remove the plug from the socket.
Please remember the cleaning tips
contained in the section “Cleaning and
care”.
The contact surfaces (the front of the cavity
and the inside of the door) must be kept
quite clean in order to guarantee correct
functioning. Clean the contact surfaces
with a neutral detergent and a cloth that
does not scratch or cause any type of
friction.
Warning: Never use the appliance if the
contact surfaces are damaged. Only use
the appliance again if it has been repaired
by a technician from the Technical Support
Service.