Filter
Top Products
35
EN
Programming the microwave
The normal functions (microwave, grill,
microwave + grill, defrosting by weight and
defrosting by time) may be programmed one
after each other, up to a maximum of 3
functions.
For example, to defrost 800 g. of meat, cook it
for 10 minutes at power 4 of the microwave
function and then for 8 minutes at power 3 of the
microwave+ grill, proceed as follows:
1. Press the DEFROST button. The function
button goes green.
2. The type of food Meat (Type 1) is already
enabled.
3. Use the “-“ and “+” buttons to indicate the
weight of the food (0.8 kg).
4. Press the CLOCK/PROGRAMME button and
select the next function.
5. Press the MICROWAVE button. The function
button goes green.
6. Use the “-“ and “+”buttons to indicate the
desired cooking time (10 min).
7. Press the “-“ button to select the microwave at
power 4.
8. Press the CLOCK/PROGRAMME button and
select the following programme.
9. Press the MICROWAVE + GRILL button. The
function key goes green.
10. Use the “-“ and “+”buttons to indicate the
desired cooking time (8 min).
11. Press the “-“ button twice, to set the
microwave to power 3.
12. Press the start button. The microwave starts
to function.
13. The appliance beeps when it goes from one
function (defrosting) to another (microwave
or grill).
14. When the microwave beeps, open the door
and turn the food around. Close the door
again and press the start button.