Teka MWL 20 BIT Microwave Oven User Manual


 
33
EN
Function: Microwave + Grill
1. Press the button MICROWAVE + GRILL. The function button
goes green.
2. Enter the operating time (e.g., 10 minutes) using the “-“ and “+
buttons.
3. To change the power of the microwave, press the ““ and “ +
“buttons. If the buttons are not pressed, the appliance functions at
the maximum power. The screen shows the power level selected
(P 01 - P 05). See the section on “Technical Characteristics”.
4. Press the start button. The microwave starts to function.
Function: Defrosting by weight (automatic)
1. Press the button DEFROSTING. The function button goes green.
2. Use the ““ and “+” buttons to indicate the type of food (see the
following list). If you do not indicate any type of food, the appliance
will function on default programme 1 (meat).
3. Use the ““ and “+” buttons to indicate the weight of the food (for
example, 1.2 kg).
4. Press the start button. The microwave starts to function.
5. When the oven stops and starts to beep, move or turn the foods.
To continue, close the door of the microwave and press the start
button, to continue the defrosting process.
The following table shows the programmes for the defrosting by weight function, indicating the weight ranges,
defrosting and resting times (to ensure that the food reaches a uniform temperature).
Programme Food Weight Time Resting time
Pr 1 Meat 0.1 – 1.5 kg 4 – 45 min 20 – 30 min
Pr 2 Poultry 0.1 – 1.5 kg 4 – 50 min 20 – 30 min
Pr 3 Fish 0.1 – 1.5 kg 4 – 45 min 20 – 30 min
Pr 4 Fruit 0.2 – 0.5 kg 2 – 13 min 5 – 10 min
Pr 5 Bread 0.1 – 0.8 kg 2 – 19 min 5 – 10 min
Function: Defrosting by time (manual)
1. Press the DEFROST button twice. The function button goes green.
2. Use the “-“ and “+” buttons to indicate the defrosting time (for
example, 10 min.).
3. Press the start button. The microwave starts to function.
4. When the oven stops and starts to beep, move or turn the foods.
To continue, close the door of the microwave and press the start
button, to continue the defrosting process.