Filter
Top Products
– 4 –
INSTALLATION, OPERATION AND CARE OF
ABC7 SERIES COMBI
SAVE THESE INSTRUCTIONS
GENERAL
Vulcan combination ovens are designed and assembled in the USA with quality workmanship and material.
Proper installation, usage and maintenance will result in many years of satisfactory performance. It is
suggested that you thoroughly read this entire manual and carefully follow all of the instructions provided.
The ABC Combi is unique in many ways but most notable is the controls: Temperature, Time, and Humidity.
The most essential, yet consistent control capability for a combi.
INSTALLATION
Before installing, verify that the electrical and/or gas supply agrees with the specifi cations on the data plate
located on the lower front corner of the right side panel. If the supply and equipment requirements do not
agree, do not proceed with the installation. Contact your dealer or Vulcan-Hart immediately.
UNPACKING
Each oven is inspected before leaving the factory. The transportation company assumes full responsibility
for safe delivery upon acceptance of the shipment. Immediately after delivery, unpack and check for
shipping damage. If the oven is damaged, save the packing material and contact the carrier immediately.
There is a fi fteen-day limitation on fi ling freight damage claims with the freight company. Freight damage
is not covered under warranty.
INSTALLATION CODES AND STANDARDS
In the United States, the Vulcan Combi Oven must be installed in accordance with:
1. State and local codes.
2. National Fuel Gas Code, ANSI-Z223.1 (latest edition). Copies may be obtained from The American
Gas Association, Inc.; 1515 Wilson Blvd.; Arlington, VA 22209.
3. National Electrical Code (ANSI/NFPA No.70, latest edition) available from the National Fire Protection
Association, Batterymarch Park, Quincy, MA 02269.
4. Vapor Removal from Cooking Equipment, (NFPA-96, latest edition) available from NFPA.
In Canada, the Vulcan Combi Oven must be installed in accordance with:
1. Local codes.
2. CAN/CGA-B149.1 Natural Gas Installation Code (latest edition).
3. CAN/CGA-B149.1 National Fuel Gas Code (latest edition), available from The Canadian Gas
Association; 178 Rexdale Blvd.; Etobicoke, Ontario; Canada M9W 1R3.
4. Canadian Electrical Code (CSA C22.2 No.3, latest edition) available from the Canadian Standards
Association, 5060 Spectrum Way, Mississauga, Ontario, Canada L4W 5N6.