Filter
Top Products
Using Your Microwave Oven
Microwave oven controls
There are three parts in the control section:
-Display/Clock and Indicators
-Command Pads
-Number Pads
Instructions for each control are covered on the
following pages. Read them carefully.
When you first plug in the oven, a tone will
sound and the Display will show ‘12:Oooo”. The
dock will begin to run. The Display shows the
time in hours, minutes and seconds. Set the clock
to the correct time of day (page 11). lf your
electriciiy goes off for a while and comes back
on, the clock will return to ‘12:OV and begin to
run. Reset the dock.
Display/clock
and lndlcators
When you are not using the microwave oven, this
is an accurate clock.
When you are using the microwave oven, it
displays time settings, cook power settings,
defrost weigM settings and indicators.
Command pads
l
Touch Command Pads to tell the microwave
oven what to do and in what order. A few
examples:
- CLOCK SET tells the oven you are going to
set the clock
- START tells the oven to start. (See page 11
for information on the tone you hear when
touching any pad.)
l
Each Command Pad (except START, CANCEL,
and
CLOCK SET) causes an Indicator to light
when you touch the Command Pad. While the
oven is running,
an
Indicator (or Indicators) will
be on to show what the oven is doing.
l
tf you touch two instructions into the same
cyde, the second set of instructions will cancel
the first.
Number pads
Once you’ve touched a Command Pad to tell the
oven what you want it to do, you’ll touch Number
Pads to tell it . . .
-a Time,
-a &ok Power,
-a Defrosting Weight.