Filter
Top Products
Cooking at lower cook powers
For best results, some recipes call for bwer Cook
Powers. The lower the Cook Power, the slower
the cooking. Each Number Pad also stands for a
different percentage of Cook Power. Many
recipes in the Cooking Guide tell you, by number,
which Cook Power to use. Recipes in other books
and magazines may tell you by name (HI, MED.
LO, etc.) or percentage (loo/o, 50%, 8Ct%, etc.).
The following chart gives the percentage of
Cook Power each Number Pad stands for, and
Cook Power name usually used:
automatic 100% of full power HlGH
Q-90% of full power
8-8096 of full power
7=70% of full power MED-HlGH
6-66% of full power
550% of full power MED
4140% of full power
3~30% of full power MED-LOW
2-2096 of full power
1-l 6% of full power LOW
O-TIMER (fan and light will be off)
1.
2.
3.
4.
5.
6.
Put food in the oven and close the door.
Touch COOK. The Display will show the
STAGE 1, 0, HI and % POWER Indicators,
and the TlME Indicator will start to flash.
Touch
Number Pads for the cooking time you
want. The Display will show the numbers you
touched
In the order you touched them.
This
example shows 7 minutes, 30 seconds.
Touch COOK POWER. The Display will show
the STAGE 1 and HI Indicators and the %
POWER lndiitor will start to flash. This
shows the oven is preprogrammed to cook at
full (HlGH) power.
Touch a Number Pad for the Cook Power you
want. The Display will show what you touched.
This example shows you touched Number Pad
5 for 50% of full power.
Touch START. The STAGE 1 and % POWER
Indicators will stay on to show that the oven is
cooking in the first cycle at a Cook Power
other than HIGH.
The Diiplay counts down the time to show
how much cooking time is left in the cyde.
When the cooking time ends, “End” will
show on the Display and two short and one
bng tone will sound. (You can stop the tones
by opening the door or by touching CANCEL.)
‘End’ will remain on the Display until the door
is opened or CANCEL is touched. The Display
will then show the time of day.
13