Filter
Top Products
12 Chapter 1
Installation and Setup
Power Requirements
Installation and Setup
Battery Information
The analyzer uses a Lithium Polycarbon Monofloride battery to power
the analyzer clock. The battery is located on the CPU board.
You can order the service documentation for Agilent spectrum
analyzers through your Agilent Sales and Service office. The
documentation is described under “Options” on page 65.
NOTE If the analyzer’s clock does not keep time when powered off, the
problem is the battery. See “Returning an Analyzer for Service” on
page 81.
WARNING Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type recommended. Discard
used batteries according to the manufacturer’s instructions.