Filter
Top Products
Chapter 4 55
Viewing Catalogs and Saving Files
Saving a File
t\
Viewing Catalogs and Saving Files
Figure 4-4 Viewing Traces 1, 2, and 3
Step 2. Save the file
1. To access the Save menu, press, File, Save.
2. Select the type of file you want to save. In this example you are
saving a trace; press
Type, Trace.
NOTE Trace files are not bitmap files. Files saved as Trace cannot be imported
into other applications or converted. If you require the use of other
applications, for example Microsoft® Word or Microsoft® Excel, be
sure to save your files as .gif or .wmf formats using
Screen for your
file
Type. Comma separated value (csv) files can also be imported
into Microsoft® Excel.
3. Select the trace you wish to save (1, 2, 3, or all traces). In this
example you will save trace 3; press
Source (softkey), Trace 3.
4. Select the format you wish to use for saving the trace, either trace
plus state (
Trace + State) or comma separated value (CSV). In this
example you will save as trace plus state; press
Format, Trace + State.
5. Enter a filename by pressing Name. The Alpha Editor appears. For
this example you will name the file, “TEST1”. (The numeric keypad
is also available for the filename.) Note that the file extension is
always set by the system and for this file type the extension is TRC.
You must now press the
Enter (hardkey) to get back to the Save
menu.