Filter
Top Products
Chapter 5 65
Options and Accessories
Options
Options and Accessories
Options
Option
Number
Name Description
0B0
Manual Set on CD-ROM
Only
The documentation CD-ROM contains the standard
documentation set as well as Adobe Acrobat Reader with
Search.
0B1
Additional Manual Set An additional set of the standard documentation shipped with
the analyzer. See “Initial Inspection” on page 7 for information
about the standard documentation set.
0BW
Service Documentation The Service guide describes assembly-level troubleshooting
procedures, provides a parts list, and documents post-repair
procedures.
1CM
Rack Mount Kit Includes rack mount flanges and hardware. Used to rack mount
analyzers without front handles (available as P/N 5063-9215).
1CN Front Handle Kit Available as P/N 5063-9228.
1CP
Rack Mount Kit with
Handles
Includes the parts necessary to rack mount an analyzer with
front handles attached (available as P/N 5063-9222). (Includes
handles.)
1CR
Rack Slide Kit Available as P/N E4406-60115. Rack slides allow the analyzer
to be pulled out while the analyzer is secured to the rack.
1DS
Preamplifier An internal preamplifier assembly. Not required when Option
110 is installed.
Frequency Range: 100 kHz to 3 GHz
015
6 GHz Measurement
Accessory Kit
Includes accessories necessary to set up return loss and
loss/gain measurements. Used with Option 215.
107
Audio Input, 100 kΩ Audio signal analysis capability that works with the Option 233
Measuring Receiver System. Available in all models. Option
107 cannot be installed if Option 122 or 140 is installed.
Requires Option 233.
110
RF/µW Internal
Preamplifier
An internal preamplifier assembly that covers all frequency
bands. Available in all models. Option 110 cannot be installed if
Option 1DS is installed.
Frequency Range: 100 kHz to 50 GHz
111
USB Device Side I/O
Interface
Provides a rear-panel USB interface connector (device side I/O
only).
115
512 Mb User Memory Provides additional memory to accommodate a greater number
of applications. Available in all models. Option 115 cannot be
installed if Option 117 is installed.