Filter
Top Products
68 Chapter 5
Options and Accessories
Options
Options and Accessories
233 Measuring Receiver
Personality and PC
software
This option allows you to use your PSA and an Agilent power
meter as a measuring receiver system through the PSA user
interface (UI). It also provides PC software, as an extension of
the built-in measuring receiver personality, offering graphic
and remote UI on an external PC. A sensor module to power
meter adapter, N5532A Option 019, is required for use with
N1911A/12A power meters. Option 233 is available in all
models.
235
(E4440A,
43A, & 45A
only)
80 MHz Digitizer External
Calibration Wizard and
License
This calibration software runs on an external PC to generate a
file of correction factors for PSAs with option 122. You get
improved measurement accuracy using this correction file.
241 Flexible Digital
Modulation Analysis
Provides flexible demodulating analysis for measuring many
different formats of digital modulation, including:
MSK type 1 and type 2
EDGE
QPSK and offset QPSK
8PSK
BPSK
DQPSK and Pi/4 DQPSK
D8PSK
QAM 16, 32, 64, 128, 256
FSK 2, 4, 8 states
266 Programming Code
Compatibility Suite
Lets you select one of three different modes that let you use a
limited set of 8560 Series, 8566B/8568B, or 8590 Series
programming commands. These modes let you control the PSA
Series analyzers with code from other spectrum analyzer
families. When these modes are enabled, the instruments
native SCPI commands are disabled if the remote language
selected is not SCPI.
422
(E4440A,
43A, & 45A
only)
40 MHz to 80 MHz
Bandwidth Digitizer
Upgrade Kit
Provides firmware and documentation necessary to upgrade
from a 40 MHz IF option (140) to an 80 MHz IF option (122).
ANE
(E4440A,
43A, & 45A
only)
Enhanced Memory
Upgrade
For early instruments, replaces existing 48 Mb with 64 Mb
memory on CPU, providing additional memory for storing
optional measurement personalities. The 64 Mb memory was
shipped standard in all PSA instruments with serial numbers
≥ US/MY 42220000.
AYZ External Mixing Provides the ability to use the HP/Agilent 11970 Series
harmonic mixers, and HP/Agilent 11974 preselected harmonic
mixers with the Agilent E4440A, E4446A, or E4448A analyzer
to extend the frequency range to 110 GHz. Operation to 325
GHz is also possible with non-HP/Agilent mixers. Option AYZ
cannot be installed if Option 123 is installed.
Option
Number
Name Description