Filter
Top Products
74 Chapter 5
Options and Accessories
Accessories
Options and Accessories
RF Bridges
The Agilent 86205A 50 Ω RF bridge and 86207A 75 Ω RF bridge can be
used with the ESA series to make reflection measurements using an
analyzer with tracking generator Option 1DN or 1DQ or with an
external signal generator. The Agilent 86205A 50 Ω RF bridge can be
used with the PSA series to make reflection measurements using an
analyzer with the external source control, Option 215.
These external directional bridges offer high directivity and excellent
port match. The 86205A operates over a frequency range of 300 kHz to
6 GHz. The 86207A operates over a frequency range of 300 kHz to 3
GHz.
50 Ohm Transmission/Reflection Test Kit
The Agilent 87512A provides the accessories to measure the reflection
and transmission characteristics of 50 Ω devices up to 2 GHz. These
accessories use type N connectors. The kit contains a directional bridge,
2 cables and precision short/load terminations for calibration.
Static Safe Accessories
9300-0797 3M static control mat 0.6 m × 1.2 m (2 ft. × 4 ft.) with a
4.6 cm (15 ft.) ground wire. Does not include wrist strap
or cord
9300-1367 Wrist-strap, color black, stainless steel. Four adjustable
links and a 7 mm post-type connection.
9300-0980 Wrist-strap cord 1.5 m (5 ft.)
9300-1308 ESD heel-strap (reusable 6 to 12 months)
Noise Sources (for use with PSA Option 119)
Agilent 346A 10 MHz to 18 GHz noise source with 5 dB ENR
(nominal)
Agilent 346B 10 MHz to 18 GHz noise source with 15 dB ENR
(nominal)
Agilent 346C 10 MHz to 26.5 GHz noise source with 15 dB ENR
(nominal)