Filter
Top Products
11
Disassembling your blender for cleaning,
care and storage
Step 1.
Always make sure the Breville Hemisphere Blender is
off by pressing the ‘Power’ button on the control
panel.Then turn off at the power outlet and unplug
the power cord.
Step 2.
Remove the blender pitcher from the motor base
by grabbing the handle and lifting the jug in an
upward direction.
Step 3.
Remove the blade assembly by upturning the blender
jug and twisting the Blade Removal System
clockwise, (see fig 1) then lift upwards and away
from the base of the blender.The circular plastic
surround attached to the base of the blender jug is
not removable.
Step 4.
Remove the silicon seal from the blade assembly
The Breville Hemisphere Blender features a one
piece Blade Removal System for the easy
removal of the blade and jug for cleaning.
Note
Operating your Breville Hemisphere Blender
continued
Step 10.
At the end of use, always make sure the Breville
Hemisphere Blender is turned off by pressing the ‘Power’
button on the control panel.And then unplug the cord.
Make sure the motor and blades have completely
stopped before attempting to move the appliance, or
when the Breville Hemisphere Blender is not in use
and before disassembling, cleaning and storing.
• During the blending process, ingredients may
stick to the sides of the blender pitcher.To
push the food back onto the blades, press the
‘Power’ button on the control panel and
remove the power cord. Remove the lid and
use a plastic spatula to scrape down the sides
of the pitcher. Replace the lid before
recommencing blending.
• If any moisture or liquid appears on top of the
motor base during blending, press the ‘Power’
button on the control panel, switch off at the
power outlet and remove the power plug.
Remove the blender pitcher.Wipe the motor
base immediately with a dry cloth or paper
towel to absorb the liquid. Check that the
blender pitcher is correctly assembled.
Note
10
Fig 1
BR8577 BBL550XL_IB_Amend07 15/8/07 9:11 AM Page 10