Filter
Top Products
Page 19
Removal and Replacement:
1. Remove all wires from the contactor.
2. Remove the two #10-32 screws securing contactor
to the inside of the hood.
3. Securely install the new contactor inside the hood.
4. Refer to Fig. 7 when reconnecting the wires.
SERVICE (cont.)
CONTACTOR ASSEMBLY (ELECTRO/MECHANICAL
ONLY) (cont.)
P1113
BLK T2 to Tank Heater
RED T1 to Tank Heater
BLK to BLK Lead from Thermostat
MECHANICAL THERMOSTAT ONLY
RED L1 to Terminal
Block (Red Insert)
BLK L2 to Limit Ther-
mostat
BLK to WHI Lead from the
Three Pole 120/208V or 120/
240V Terminal Block
BLK to RED Lead from the
Two Pole 200V or 240V Ter-
minal Block
FIG. 7 CONTACTOR ASSEMBLY TERMINALS
27362 092900