Filter
Top Products
INSTALLATION OPERATION MANUAL GARLAND ELECTRIC CLAMSHELL BROILER, CXBE12-1 MODEL
Part #4600670 - 2/15
Page 18
IR TENT INSTALLATION
• The new IR Tent Assembly will protect and extend the life of the lower IR element.
• The IR Tent can be removed for cleaning at end of day, and will help to reduce the clean time for the rest of
the broiler if used.
• Part required for installation: Broiler IR Heat Tent Assembly.
Turn broiler o and disconnect power supply.
HOT SURFACE
Grill Temperatures
Will Cause Severe
Burns
PPE
Approved Personal
Protective Equipment
Must be worn
.
How to install an IR Tent.
1. Raise platen and open the lower grates.
2. Use Scotch Brite green pads to clean the heating
elements and interior surfaces. Remove any dirt
and grease from the area.
3. Insert the IR Tent assembly in the orientation as
shown. No fasteners are required.
4. Ensure the IR Tent assembly sits properly in place
before closing the grates. Shown below is a top
view of an IR Tent in installed position.