Filter
Top Products
INSTALLATION OPERATION MANUAL GARLAND ELECTRIC CLAMSHELL BROILER, CXBE12-1 MODEL
Part #4600670 - 2/15
Page 24
CLEANING AND MAINTENANCE, continuation
14. Tighten knob
completely, until
bracket touches the
cowl assembly, but
do not over-tighten.
Ensure broiler grate is
tight up to the cowl
assembly. The grate
should be parallel to
the cowl assembly.
(see previous latching
instructions)
15. Brush upper broiler
grate with broiler
brush, from front to
back, to push debris
towards the back of
broiler.
16. Brush the lower
broiler grates with
broiler brush. Brush
from front to back .
17. Use detailing tool
to raise each half of
lower grate.
Careful not to drop grates
while they are raised.
18. Scrape grate surfaces
that are now exposed,
rst with tooth side
of detailing tool,
then with smooth
side. Brush heating
elements and area of
heavy build-up using
broiler brush.
19. Remove IR tent
assembly from the
IR elements. Lift up
straight IR tent and
place it in the sink to
be wash.
20. Use detailing tool to
lower grate halves
back into a lower
position.
21. Remove skirt on each
side of lower broiler.
Lift each one straight
up from the sides,
then tilt until skirt is
clear of broiler.
Important Note: Be careful not to get Kay QSR
super contact cleaner on the grates.