Filter
Top Products
26
If you have several clocks in your kitchen,
you may wish to turn off the time of day clock
display on your range.
Touch the CLOCK pad once to turn off the
time of day display. Although you will not
be able to see it, the clock maintains the
correct time of day.
Touch the CLOCK pad again to recall the
clock display.
To Turn Off the Clock Display
To Set the Clock
The clock must be set to the correct time of
day for the automatic oven timing functions
to work properly. The time of day cannot
be changed during a timed baking or
self-cleaning cycle.
Touch the CLOCK pad once or twice
(depending on your model).
On some models, touch and hold the
TIMER/CLOCK pad.
Depending on your model, touch the
number pads or the + or – pads.
Touch the START pad.
Using the clock and timer. (on some models)
Make sure the clock is set to the correct time of day.
The timer is a minute timer only. The timer does not
control oven operations.
Touch the KITCHEN TIMER ON/OFF or
TIMER/CLOCK pad (depending on your
model).
Depending on your model, touch the
number pads or the + or – pads until the
amount of time you want shows in the
display.
If you make a mistake touch the KITCHEN TIMER
ON/OFF or TIMER/CLOCK pad and begin again.
On some models, you will need to touch
the START pad.
On some models, when the timer reaches
:00, the control will beep 3 times followed
by one beep every 6 seconds until the
KITCHEN TIMER ON/OFF or TIMER/CLOCK
pad (depending on your model) is
touched.
On models with a START pad, the 6 second tone
can be canceled by following the steps in the
Special features of your oven control section
under Tones at the End of a Timed Cycle.
To clear the tones on models with a control knob, press
the pad of the function you are using.
To Set the Timer