Filter
Top Products
46
Oven Light Replacement
(on some models)
NOTE: The glass cover should be removed only when
cold. Wearing latex gloves may offer a better grip.
CAUTION: Before replacing your oven light
bulb, disconnect the electrical power to the oven at
the main fuse or circuit breaker panel.
Be sure to let the light cover and bulb cool
completely.
For your safety, do not touch a hot bulb with
bare hands or a damp cloth.
To remove:
Turn the glass cover counterclockwise
1/4 turn until the tabs of the glass cover
clear the grooves of the socket.
Using gloves or a dry cloth, remove the
bulb by pulling it straight out.
To replace:
Use a new 130-volt halogen bulb, not to
exceed 50 watts.
Using gloves or a dry cloth, remove the
bulb from its packaging. Do not touch
the bulb with bare fingers.
Push the bulb straight into the receptacle
all the way.
Place the tabs of the glass cover into the
grooves of the socket. Turn the glass cover
clockwise 1/4 turn.
For improved lighting inside the oven,
clean the glass cover frequently using a wet
cloth. This should be done when the oven
is completely cool.
Reconnect electrical power to the oven.
Care and cleaning of the range.
Bulb
Socket
Tab
Glass cover
Use gloves
or cloth
Receptacle
Receptacle