Filter
Top Products
9
Precise Warm Feature
To turn on the precise warm feature:
Touch the ON/OFF pad, then touch the
PRECISE WARM pad. The surface unit will
turn on to warmer setting W3 (medium
setting).
Use the + or – pads to choose additional
settings between W1 (lowest setting) and
W5 (highest setting).
To change from the warmer settings to regular
cooking settings, press the PRECISE WARM pad
again. The surface unit will be on power setting
LO. The surface unit may then be set to the
desired regular cooking setting using the
+ or – pads. To turn off the surface unit,
whether using regular cooking settings or
warmer settings, touch the ON/OFF pad.
CAUTION : Do not warm food on a PRECISE
WARM surface unit setting for more than 2 hours.
Do not use plastic wrap to cover food. Plastic may melt
onto the surface and be very difficult to remove.
Use only cookware recommended for top-of-range
cooking.
CAUTION : Always start with hot food.
Do not use to heat cold food. Placing uncooked or
cold food on a precise warm setting could result
in foodborne illness.
For best results, all food on PRECISE WARM
should be covered with a lid or aluminum foil.
Always use pot holders or oven mitts when
removing food from a precise warm surface
unit as cookware will be hot.
A hot surface indicator light will glow when the
glass surface is hot and will remain on until the
surface has cooled below 150°F.