Filter
Top Products
Wire cover holder
45
Oven Light Replacement
(on some models)
CAUTION: Before replacing your oven light
bulb, disconnect the electrical power to the range at
the main fuse or circuit breaker panel.
Be sure to let the light cover and bulb cool
completely.
To remove the cover:
Hold a hand under the cover so it doesn’t
fall when released. With fingers of the
same hand, firmly push back the wire cover
holder. Lift off the cover.
Do not remove any screws to remove the cover.
Replace bulb with a 40-watt appliance bulb.
To replace the cover:
Place it into groove of the light receptacle.
Pull wire forward to the center of the cover
until it snaps into place.
Connect electrical power to the range.
CAUTION: Before replacing your oven light
bulb, disconnect the electrical power to the range at
the main fuse or circuit breaker panel.
Be sure to let the light cover and bulb cool
completely.
To remove the cover:
Twist lens counterclockwise about a quarter
turn to remove.
Do not remove any screws to remove the cover.
Replace bulb with a 40-watt appliance bulb
or 2-prong halogen bulb, as appropriate.
To replace the cover:
Line up tabs of lens in front of tabs on
housing and rotate clockwise to engage.
Oven Light Replacement (on some models)