Model EEG-141, 142, 143, 144
SECTION 7. TROUBLESHOOTING
7-1. TROUBLE SHOOTING GUIDE
Problem Cause Correction
POWER switch ON but
fryer completely inoperative
Control error code “E-10”
Vat is under-filled
• Open circuit
• Oil temperature too high
• JIB is low or empty
• JIB oil line is clogged or
collapsed
• Filter pan needs cleaned
• Plug fryer in
• Check breaker or fuse at supply box
• Press the red reset button under the right
side of the controls; if high limit does not
reset, high limit must be replaced
• Fill the JIB
• Check JIB line
• Clean filter pan and change paper or pad
609 7-1