Filter
Top Products
28
3 Familiarising yourself with the control options
The set amount of water flows into the cup. The prepara-
tion stops automatically.
READY
appears on the dis-
play.
It is easy to make default settings for the amount of water for all
coffee specialities, the hot water and steam according to cup size.
As in the following example, adjust the amount of water once.
Every time you prepare a drink in the future, this amount of
water will be dispensed.
Default settings according to cup size works the same way for all
coffee specialities.
Example: To make default settings for the amount of water for
an Espresso, proceed as follows:
Precondition:
READY
appears on the display.
Place an Espresso cup under the coffee spout.
a l Press and hold the 1 Espresso button.
1 ESPRESSO
appears on the display.
a l Hold the 1 Espresso button down until
ENOUGH
COFFEE ?
appears.
a l Release the 1 Espresso button.
Coffee preparation will start and the Espresso will flow
into the cup.
Press any button as soon as enough Espresso has flowed
into the cup.
Espresso preparation will now stop.
OK
appears briefly
on the display. The set amount of water for an Espresso
will be permanently stored.
You can alter these settings at any time by repeating the
above procedure.
l
l
o
Default settings
according to cup size
Default settings
according to cup size