51
7 Permanent settings in programming mode
Ä L Turn the Rotary Switch until
EXIT
appears.
M l Press the Rotary Switch to exit the programming mode.
READY
The unit for the amount of water is set in the factory. You can set the
unit for the amount of water to
ML
or
OZ
.
The time format is set in the factory. You can set the formats
24 HRS
or
AM/PM
.
Example: To change the unit for the amount of water from
ML
to
OZ
, proceed as follows.
Precondition:
READY
appears on the display.
M l Keep the Rotary Switch pressed until
RINSE
appears.
Ä L Turn the Rotary Switch until
DISPLAY
appears.
M l Press the Rotary Switch to enter the programme item.
ML/OZ
.
To change the time format, turn the Rotary Switch until
24H/AM PM
is displayed.
M l Press the Rotary Switch to enter the programme item.
ML
Ä L Turn the Rotary Switch until
OZ
appears.
M l Press the Rotary Switch to confirm the setting.
OK
appears briefly on the display.
ML/OZ
Ä L Turn the Rotary Switch until
EXIT
appears.
M l Press the Rotary Switch to exit the programme item.
DISPLAY
Ä L Turn the Rotary Switch until
EXIT
appears.
M l Press the Rotary Switch to exit the programming mode.
READY
o
Units amount of water/
time format
Units amount of water/
time format
