Filter
Top Products
45
5 Preparation at the touch of a button
To ensure that the Professional Cappuccino Frother works per-
fectly, you should rinse and clean it regularly. The description for
this can be found in Chapter 8, “Maintenance – Professional
Cappuccino Frother”.
To obtain a perfect water flow, attach the exchangeable hot water
nozzle. You can find the nozzle under the cover of the storage
compartment.
There is a danger of scalding from hot water splashes.
Avoid direct contact with the skin.
Start by exchanging the nozzle:
Carefully remove the Professional Cappuccino Frother
from the Connector System
©
.
Open the cover of the storage compartment. Take out the
hot water nozzle and close the cover again.
Stick the hot water nozzle onto the Connector System
©
by lightly rotating.
Place a cup under the hot water nozzle.
q l Press the hot water button.
WATER
appears on the display, and then the pre-set tem-
perature briefly appears.
The pre-set amount of water flows into the cup and the
process stops automatically.
READY
By pressing the hot water button several times (within
approx. 2 seconds) you can set the temperature to your
individual preference. This setting is not saved.
During preparation, you can change the amount by turning
the Rotary Switch.
l
l
l
l
l
o
o
Hot water Hot water
CAUTIONCAUTION