55
8 Maintenance
Turn the selection lever of the nozzle to the STEAM
position
k .
h l Press the maintenance button.
FILTER RINSING
- Water will flow out at the nozzle.
You can interrupt the filter rinsing at any time. To do this, press
any button.
The water may be slightly discoloured. This is not harmful to
health, nor does it affect the taste.
Filter rinsing stops automatically after approx. 500 ml.
HEATING
appears on the display, and then
READY
appears.
You can also try out ‘changing the filter’ online. Visit the
Knowledge Builder at www.jura.com.
You can initiate the ‘Changing the filter’ operation manually.
Precondition: The filter is activated and
READY
appears on the
display.
M l Keep the Rotary Switch pressed until
RINSE
appears.
M l Press the Rotary Switch to enter the programme item.
RINSE
Ä l Turn the Rotary Switch until
FILTER
appears.
M l Press the Rotary Switch.
CHANGE
Continue with the second prompt to take action
(indicated by a
l), as is described under
‘Change following a prompt’.
l
o
o
@
l
Manual filter changeManual filter change
