Filter
Top Products
48
7 Default settings in programming mode
Ä L Turn the Rotary Switch until
TEMP
appears.
M l Press the Rotary Switch to enter the programme item.
NORMAL
Ä L Turn the Rotary Switch until
HIGH
appears.
M l Press the Rotary Switch to confirm the setting.
OK
appears briefly on the display.
TEMP
Ä L Turn the Rotary Switch until
EXIT
appears.
M l Press the Rotary Switch to exit the programme item.
BUTTONS
Ä L Turn the Rotary Switch until
EXIT
appears.
M l Press the Rotary Switch to exit the programming mode.
READY
An energy saving mode default setting can be made under this
programme item (E.S.M.
©
).
Your IMPRESSA has two energy-saving modes:
ENERGY -
Your IMPRESSA is continuously ready for use.
All coffee and milk products, as well as hot water, can be
prepared without having to wait.
ENERGY √
After approx. 5 minutes, your IMPRESSA switches to the
energy-saving temperature and is not ready for use.
Before coffee, hot water or milk is prepared, the machine
heats up for approx. 30 seconds.
ENERGY -
is defined under the basic settings.
Example: To change the energy-saving level from
ENERGY -
to
ENERGY √
, proceed as follows:
Precondition:
READY
appears on the display.
M l Keep the Rotary Switch pressed until
RINSE
appears.
Ä L Turn the Rotary Switch until
ENERGY -
appears.
M l Press the Rotary Switch to enter the programme item.
SAVE -
Ä L Turn the Rotary Switch until
SAVE √
appears.
p
u
u
p
u
u
o
Energy save mode Energy save mode