Filter
Top Products
46
6 Default settings according to cup size
It is easy to make default settings for the amount of water for all
coffee specialities, the hot water and steam according to cup size.
As in the following example, adjust the amount of water once.
Every time you prepare a drink in the future, this amount of
water will be dispensed.
The default settings according to cup size works the same way
for all coffee specialities.
Example: To make default settings for an Espresso, proceed as
follows.
Precondition:
READY
appears on the display.
Place an Espresso cup under the coffee spout.
a l Press and hold the 1 Espresso button.
1 ESPRESSO
appears on the display.
a l Hold the 1 Espresso button down until
ENOUGH
COFFEE ?
appears.
a l Release the 1 Espresso button.
Coffee preparation will start and the Espresso will flow
into the cup.
Press any button as soon as enough Espresso has flowed
into the cup.
Espresso preparation stops.
OK
appears briefly on the
display. Your IMPRESSA will remember the amount of
water you have specified for an Espresso for good.
You can alter these settings at any time by repeating the
above procedure.
l
l
l
o
6 Default settings according to cup size