Filter
Top Products
62
8 Maintenance
Carefully remove the Professional Cappuccino Frother
from the Connector System
©
.
Disassemble the Professional Cappuccino Frother into its
components.
Rinse all the nozzle parts thoroughly under running
water.
Reassemble the Professional Cappuccino Frother and
attach it to the Connector System
©
.
The cleaning of the Professional Cappuccino Frother is
finished.
Even in the case of the best bean coffee, it can happen that for-
eign objects can be found in the beans. These can block the
grinder.
g l Switch your machine off with the On/Off button.
e l Switch your machine off at the power switch.
Open the cover of the bean container and remove the
aroma preservation cover.
Remove the beans with a vacuum cleaner.
Loosen the screw in the bean container and lift up the
finger protection.
Remove the remaining beans with a vacuum cleaner.
Apply the grinder key.
Turn the key counterclockwise until the jammed foreign
objects are released, and remove these.
Put the finger protection down again and screw it back
tightly in place.
Fill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
l
l
l
l
l
l
l
l
l
l
l
l
Disassemble
Professional
Cappuccino Frother
Disassemble
Professional
Cappuccino Frother
Removing foreign
objects
Removing foreign
objects