Filter
Top Products
58
8 Maintenance
The descaling programme lasts approx. 40 minutes.
JURA descaling tablets are available from your stockist.
If you use a CLARIS plus filter cartridge and this is acti-
vated, you will not be prompted to change the filter.
You can also try out the “Descale machine” operation
online. Visit the Knowledge Builder at www.jura.com.
Precondition:
DE-SCALE / READY
appears on the display,
and the maintenance button
h lights up.
h l Press the maintenance button.
EMPTY TRAY
Empty the drip tray and coffee grounds container and put
them back into the machine.
AGENT IN TANK
Remove the water tank and empty it.
Completely dissolve the contents of one blister (3 JURA
descaling tablets) in a container that holds 500 ml of
water. This may take several minutes.
Pour the solution into the empty water tank and insert it
in the machine.
AGENT IN TANK
- The maintenance button h lights
up.
Remove the nozzle.
Place a receptacle (at least 500 ml) under the Connector
System
©
.
h l Press the maintenance button.
DE-SCALING
This causes water to flow out of the Connector System
©
.
The maintenance button blinks during the descaling oper-
ation.
The operation stops automatically -
EMPTY TRAY
.
Empty the drip tray and coffee grounds container and put
them back into the machine.
Empty the container under the Connector System
©
.
FILL WATER TANK
Rinse the water tank thoroughly and fill it with cold, fresh
mains water.
o
o
o
@
l
l
l
l
l
l
l
l
l
Descaling following a
prompt
Descaling following a
prompt