Filter
Top Products
57
8 Maintenance
The cleaning operation is now complete. The IMPRESSA
is ready for use again.
You can initiate the “Cleaning the machine” operation manually.
Precondition:
READY
appears on the display.
M l Keep the Rotary Switch pressed until
RINSE
appears.
M l Press the Rotary Switch to enter the programme item.
RINSE
Ä l Turn the Rotary Switch until
CLEAN
appears.
M l Press the Rotary Switch.
EMPTY TRAY
Continue with the second prompt to take action (indi-
cated by
l), as is described under “Cleaning following a
prompt”.
The IMPRESSA builds up deposits of limescale over time and
automatically prompts you to descale it. The degree of calcifica-
tion depends on the degree of hardness of your water.
If the descaling agent comes into contact with the skin or eyes,
this can cause irritation.
Avoid contact with the skin or eyes.
Rinse the descaling agent off with clean water. Should you
get any descaling agent in your eye, see a doctor.
If the wrong descaling agent is used, the machine could be dam-
aged and/or traces of detergent could be left behind in the
water.
Use only original JURA care products.
If the descaling operation is interrupted, there may be damage to
the machine.
Allow the descaling program to run to the end.
If the descaling agent comes into contact with sensitive surfaces,
damage cannot be ruled out.
Clean up any splashes immediately.
l
l
l
l
l
l
Manual cleaningManual cleaning
Descale machine Descale machine
CAUTIONCAUTION
CAUTIONCAUTION
CAUTIONCAUTION
CAUTIONCAUTION