Filter
Top Products
Setting Oven Controls
Preheat
For best baking performance use the Preheat feature. The
Preheat feature wiii bring the oven up to the set cooking
temperature. A reminder tone wiii sound indicating when
the set temperature is reached and to place the food in the
oven. Preheating is not necessary when roasting or cooking
casseroles.
The following temperature settings apply to the preheat
feature:
* Auto-suggest (default) setting: 350°F/177°C
° Min. baize setting: 170°F / 77°C
° Max. baize setting: 550°F / 288°C
Setting preheat
See example below to set a preheat to start immediately at
the default temperature.
1. Press PREHEAT
If needed, use numeric keypads to enter a different oven
temperature.
2. Press START
"PRE" and the actual oven temperature shown in the display
will alternate as the oven heats and reaches set temperature.
When the oven is finished preheating, the controls will beep
to remind you to place food in the oven. The preheat feature
will perform like the Baize feature and continue to maintain
the oven set temperature until cancelled.
NOTE
• To cancel the function, you may press STOP at any time
when setting the control or during the cooking process.
* To change the set temperature while the oven is already
heating, follow the same procedure described above.
* During the preheating, the convection fan wiii be activated
to allow the oven to reach its target temperature faster.
The Baize, Broil and Convection elements will also cycle for
a better heat distribution.
Bake
Use the bake feature to cook most food items that require
normal cooking temperatures.
The following temperature settings apply to the bake
feature:
* Auto-suggest (default) setting: 350°F/177°C
* Min. baize setting: 170°F / 77°C
* Max. baize setting: 550°F / 288°C
Setting bake
See example below to set a baize to start immediately at
the default temperature.
1. Press BAKE
If needed, use numeric keypads to enter a different oven
tem peratu re.
2. Press START
Once START is pressed the oven will begin heating. The
oven display shows the temperature rising.
After the oven reaches set temperature a beep will indicate
the oven is ready. The oven wiii continue to maintain this
temperature until the cooking feature is canceled.
NOTE
To cancel the function, you may press STOP at any time
when setting the control or during the cooking process.
To change the set temperature while the oven is already
heating, follow the same procedure described above.
During the preheating, the convection fan wiii be activated
to allow the oven to reach its target temperature faster.
The Baize, Broil and Convection elements wiii also cycle for
a better heat distribution.
For best results
* As much as possible, use only one rack on position 2 or
3 and center the pans. If using two racks, place the oven
racks in position 2 and 4.
° When placing multiple food items in the oven allow 2-4"
(5-10cm) of space between the food items for proper air
circulation.
Dark or dull pans absorb more heat than shiny bakeware
resulting in dark or overbrowning of foods. It may be
necessary to reduce the oven temperature or cook time
to prevent overbrowning of some foods. Dark pans are
recommended for pies. Shiny pans are recommended for
cakes, cookies and mumns.
15
Pan position for one rack
baking.
Pan position for two rack
baking.