Filter
Top Products
User Preferences
Setting Clock
See the example below to set the clock to 1:30.
1. Press Q.
2. Enter 1:30 to advance to 1:30.
3. Press START to accept or press STOP to reject.
Setting 12 or 24 Hour Mode
The clock display mode allows you to choose between 12
and 24 hour mode. The factory preset clock display mode is
12 hour.
See the example below to change the default mode to 24
hour.
1. Press and hold (_ for 7 seconds until "12Hr dAy" or
"24Hr dAy" appear in the display.
2. Press FLEX CLEAN to switch between the 12 and 24
hour mode.
3. Press START to accept or press STOP to reject.
Adjusting Oven Temperature
User preference offset
Your appliance has been factory calibrated and tested to
ensure an accurate baking temperature. For the first few uses,
follow your recipe times and temperature recommendations
carefully.
If you feel your oven is too hot or too cool from your baking
experience, the oven temperature may be adjusted to your
liking. The temperature may be increased up to +35°F (+19°C)
or decreased down to -35°F (-19°C) from normal.
See the example below to increase the temperature.
1. Press and hold BAKE for 7 seconds until UPO appear in
the display.
2. Enter the desired temperature change using the number
pads. FLEX CLEAN can be pressed to lower the
temperature.
3. Press START to accept or press STOP to reject.
Setting Silent Control Operation
The silent control operation allows you to control the audio
for the oven control. You may turn the audio off: and later
return to operating with all the normal audible sounds and
alerts.
See the example below when changing the audible settings.
1. Press and hold DELAY START for 7 seconds until BEEP
appears in the display.
2. Press FLEX CLEAN to switch between the On and Off:
mode.
Changing Between F° or C °
Your control has the ability to display and set Fahrenheit or
Celsius temperatures. The factory preset temperature display
is Fahrenheit.
See the example below to change the default temperature
display to Celsius.
1. Press and hold BROIL for 7 seconds until F or C appear
in the display.
2. Press FLEX CLEAN to switch between the F and C
mode.
3. Press START to accept or press STOP to reject.
Setting 12hr Energy Saving Mode
The oven control has a factory preset built-in 12 hour energy
saving feature that will shut off: the appliance if the oven
has been heating for more than 11hours and 59 minutes.
The oven can be programmed to override this feature for
continuous baking.
See the example below to turn off: 12 hour energy saving
mode.
1. Press and hold TIMER for 7 seconds until "12Hr OFF" or
"StAy On" appear in the display.
2. Press FLEX CLEAN to switch between the "12Hr OFF" or
"StAy On" mode.
3. Press START to accept or press STOP to reject.
Restoring Factory Default Settings
When new, your appliance was set with predetermined oven
control settings. Over time, the user may make changes to
these default settings. The following features or functions
have user options or adjustments that may have been
changed from the factory default settings:
° 12 or 24 hour display mode
° Continuous bake or 12-Hour Energy Savings mode
° Silent or audible control
° Oven temperature display (Fahrenheit or Celsius)
° Oven temperature adjustments
° Aii stored recipes
Please be aware before restoring to factory default
settings that ALL of the above user settings wiii be restored,
including any oven temperature offset and any stored recipe
information.
1. Press and hold the 7 numeric keypad until acceptance
tone sounds (about 6 seconds).
2. Press START. The control wiii reset aii user preference
settings back to factory default settings.
3. Press START to accept or press STOP to reject.
28