Filter
Top Products
C-1
ACCESSORIES
SQUARE WAVE TIG 255
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
OPTIONS / ACCESSORIES
• Hand Amptrol (K812)
• Foot Amptrol (K870)
• Arc Start Switch (K814)
• Magnum Cooler Horizontal TIG Mounting Bracket
(K559-2)
• Undercarriage (K932-1)
UNDERCARRIAGE FUNCTION
The Square Wave TIG 255 is designed to be used
with a Lincoln K932-1 Undercarriage. Complete
installation instructions are included with the K932-1
undercarriage. When the undercarriage is properly
installed, the Square Wave TIG 255 lift bail is non-
functional. Do not attempt to lift the power source with
the undercarriage attached. The undercarriage is
designed for hand moving only; mechanized towing
can lead to injury and/or damage to the Square Wave
TIG 255.
INSTALLATION OF FIELD
INSTALLED OPTIONS
Instructions for connecting the K932-1 Undercarriage
and the K559-2 Magnum Cooler Horizontal TIG
Mounting Bracket are included with those acces-
sories.
Installation of the K812 Hand Amptrol, the K814 Arc
Start Switch and K870 Foot Amptrol are as follows:
Lift the Output Cover Door (if so equipped) on the
Square Wave TIG 255. Feed the cable up through the
strain relief holes in the base, and connect the 6-pin
MS-type (Amphenol) connector to the Remote
Receptacle (See Figure A.2). Secure with the thread-
ed collar.