Filter
Top Products
The flavor of the coffee produced
depends not just on the type of coffee
used, but also on the amount of water
used.
You can program the amount of water
to suit the size of your cups and the
type of coffee you are using.
For coffee drinks that use milk you can
also set the amount of milk or milk froth
to be dispensed with these drinks.
Additionally, you can set the portion
sizes for hot milk and milk froth alone.
Each type of drink has a maximum
portion size that can be programmed
into the machine. The coffee machine
halts preparation of the coffee once this
portion size has been reached. The
maximum possible portion size for this
type of drink is then saved in the
machine.
The changed portion size is always
saved in the current User profile. The
name of the current profile appears in
the top left-hand side of the display.
There are two ways of initiating the
programming of the portion size:
–
By touching the drink button when
you are preparing a coffee; or
–
By selecting "Portion size" in the
"Parameters" , menu.
If the water container becomes
empty while making a drink, the
machine will stop programming the
portion size. The portion size will not
be saved.
Tip: To cancel changing the portion
size, touch the drinks sensor which is lit
up, or touch x for "Additional
programs".
Changing the portion size
during drink preparation
Portion sizes for Espresso . and
Coffee /
^
Place the desired cup under the main
dispenser.
^
Touch . or / until "Change" appears
in the display.
The coffee system will now prepare the
selected drink.
You can set the portion size as soon
as "Save" appears in the display.
^ When the cup is filled up to the
desired level, touch OK.
From now on the programmed portion
size will be dispensed for this drink.
Portion size
31