Filter
Top Products
If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (See
"Frequently asked questions").
When the brew unit has been pulled
out, do not alter the position of the
brew unit handle.
This would displace the brew unit
and it would not fit back into the
coffee system.
^
Clean the brew unit by hand under
hot running water without using
detergent or liquid dish soap.
^
Wipe any remaining coffee off the two
filters. One filter is located in the
funnel and the other to the left of the
funnel.
^
Dry the funnel to prevent ground
coffee sticking to it the next time a
coffee is prepared.
^
Clean the inside of the coffee system
carefully.
Make sure to remove moist ground
coffee remnants regularly to prevent
bacteria from forming.
Tip: Use your vacuum cleaner to
remove dry coffee grounds.
To replace the brew unit, repeat the
previous steps in the reverse order:
^
Push the brew unit back into the
coffee system, making sure it is
straight.
^ Press the button on the end of the
handle of the brew unit a and while
doing so turn the handle clockwise
b.
^ Close the machine door.
^
Empty the drip tray and waste
container.
Cleaning and care
52