Filter
Top Products
Fault Possible cause and solution
The buttons do
not react to touch.
The appliance
cannot be
operated.
There is an internal fault.
^
Disconnect the machine from the electricity supply by
pulling the plug of the coffee machine from the outlet or
turning off the mains fuse.
The coffee system
does not turn on
although the
programmed and
activated "Turn on
at" time is
activated.
The system lock feature has been activated.
^
You need to deactivate the system lock (see "Settings -
System lock").
The coffee system was not used after being turned on three
times in a row automatically.
^
Turn the machine on and dispense a drink.
The display is
hard to see or not
legible.
The display brightness has been set too low.
^ Change this setting (see "Settings - Display brightness").
"Fill and replace
the water
container"
appears in the
display even
though the water
container is full
and in the
machine.
The water tank is not sitting properly in the appliance.
^ Remove the water container and replace it.
The water container was not correctly filled and refitted for
descaling.
^ Fill the water container to the descaling symbol F and
restart the descaling program.
"Fill and replace
the water
container"
appears after
turning on even
though the
container is filled
and fitted in the
machine.
The appliance
does not rinse.
The coffee system needs to be descaled.
^
Turn the coffee machine off with the On/Off - button. Wait
approx. 1 hour.
^
Then turn the machine on again. As soon as "Heating-up
phase" appears in the display, touch x and select
"Descale the appliance".
^
Descale the coffee system.
Frequently Asked Questions
62